LPC12D27 QuickStart Board Banner
[High Resolution Photos]
LPC12D27 QuickStart Board

Embedded Artists' LPC12D27 QuickStart Board lets you get up-and-running quickly with NXP's Cortex-M0 LPC12D27 microcontroller. This evaluation board offers many features that ease your learning curve and speed up your program development.


LPC12D27 QuickStart Board

Processor NXP's Cortex-M0 LPC12D27 microcontroller in 100-pin LQFP package.
Program Flash 128 KB
Data Memory 8 KB
Clock Crystals

• 12.000 MHz external crystal. The LPC12D27 runs at frequencies up to 45 MHz.
• 32.768 kHz rtc crystal.

Interfaces / Connectors • All LPC12D27 pins are available on expansion connectors around the processor (100 mil/2.54 mm pitch dual rows).
• UART-to-USB bridge interface for LPC12D27 UART, with mini-B USB connector and proper ESD protection.
Dimensions 110 x 100 mm (W x H)
Power Flexible powering, with on-board 800mA 3.3V voltage regulator. Can be powered from USB connector, JTAG connector (if supported by JTAG device) or an external +5V supply.
Connectors • All LPC12D27 pins are available on connectors.
• mini-B USB connector.
• SWD/JTAG connector (50 mil/1.27 mm pitch, standard SWD/JTAG connector). Pad for older, larger 20pos 100 mil pitch JTAG connector also exists, but connector not soldered.
Other • LCD with 8 14-segment characters.
• 32 Kbit I2C E2PROM.
• LM75 I2C temperature sensor.
• Trimming potentiometer on analog input.
• 4 capacitive sensors.
• Support for '555' hardware timer functionality of the LPC12D27.
• Onboard reset generation and reset push-button.
• Push-button for enabling Bootloader mode of the LPC12D27.
• Push-button for enabling start logic of the LPC12D27.
• Push-button for wakeup logic of the LPC12D27.
• Possibility to measure current consumption for LPC12D27 core, I/O and LCD controller parts individually.
• 3 LED on pin PIO0_12, PIO0_27 and PIO0_28.


Documentation and Resources

The following resources are available for download from our support site after registration of the LPC12D27 QuickStart Board.



Sample Software Disclaimer