iMX RT1052 Developer's Kit
[High Resolution Photos]
iMX RT1052 Developer's Kit

Embedded Artists' iMX RT1052 Developer's Kit lets you get up-and-running quickly with the iMX RT1052 OEM Board. All relevant interfaces are available for prototyping/evaluating your product!

There exist versions of the iMX RT1052 OEM board with on-board Wi-Fi module. Note, this version is not included in the standard iMX RT1052 Developer's Kit.

The iMX RT1052 Developer's Kit includes a 4.3 inch LCD (480x272px) with capacitive touch panel. Start prototyping your graphical user interface application immediately!

 

Do you have questions?

If you have any questions or want to discuss your project, don't hesitate to contact us for an open discussion.

 

Introduction to iMX RT1052 Developer's Kit

iMX RT1052 OEM Board - OctalSPI Flash

Introduction to the i.MX RT family - Video from NXP

 

 

 

Specification

The iMX RT1052 Developer's Kit is an Evaluation product. The included OEM board, iMX RT1052 OEM Board, is an Integration product, see respective product page for details.

iMX RT Carrier Board specification

The information listed below for the iMX RT Carrier Board is valid when the iMX RT1052 COM board is used.

Connectors and
Interfaces
• SODIMM200, 200-pos connector, 1.8V keying
• 10/100 Mbps Ethernet RJ45 connector
• USB OTG interface with ESD protection
• USB Host interface with ESD protection
• SD memory card connector
• CAN transceiver with ESD protection and termination
• UART-to-USB FTDI bridge for UART interface with ESD protection
• Debug interface with 2x5 pos 50 mil pitch Cortex debug connector and 2x10 pos 100 mil pitch ARM debug connector, with ESD protection
• Parallel 16-bit RGB display interface and touch panel interface for 4.3 inch 480x272px LCD
• Expansion connectors for many COM Board signals
• Audio codec with 3.5mm audio jack connector (for microphone and headphone output) and option for external speakers
Power • 5V DC supply voltage, either via micro-AB USB connector or 2.1mm power jack connector
• External VBAT powering possible
• Reverse polarity protection
• Internal 3.3V/2A DC/DC buck converter
Dimensions • 165 x 104 mm (same size as a typical 7 inch LCD)
• Four 4.3mm holes for mounting and grounding
Other • On/Off, Reset, ISP Enable and Wakup pushbuttons
• Input current measurement

Documentation and Resources

Flyers and specifications

  • iMX RT1052 OEM Board Flyer
  • iMX RT1052 OEM Board Datasheet (to be uploaded)
  • iMX RT1052 OEM Board alternative function pinning (to be uploaded)
  • iMX RT Carrier Board Schematics (login required)

Documentation / guides

  • Getting Started with iMX RT on Arm MDK (to be uploaded)

 

Conformity

 

Included in kit

  • One iMX RT1052 OEM Board (EAC00295 - this is the version without Wi-Fi module)
  • One iMX RT Carrier Board
  • One 4.3 inch LCD (480x272px) with capacitive touch panel
  • One micro-B to A USB cable

Note that we recommend also buying a debug interface, like LPC-Link2ULINK2 from Arm/Keil or J-Link from Segger, in order to be able to debug during your application development.

Related Products