LOADING
- NXP's Cortex-M0 LPC11D14
- LCD with 8 14-segment characters
- All LPC11D14 pins are available on connectors
The LPC11D14 QuickStart Board lets you get up-and-running quickly with NXP's Cortex-M0 LPC11D14 microcontroller
| Processor | |
|---|---|
| NXP's Cortex-M0 LPC11D14 microcontroller in 100-pin LQFP package. | |
| 32 KByte flash. | |
| 8 KByte RAM. | |
| Interface / Connectors | |
|---|---|
| All LPC11D14 pins are available on expansion connectors around the processor (100 mil/2.54 mm pitch dual rows). | |
| UART-to-USB bridge interface for LPC11D14 UART, with mini-B USB connector and proper ESD protection. | |
| mini-B USB connector. | |
| SWD/JTAG connector (50 mil/1.27 mm pitch, standard SWD/JTAG connector). Pad for older, larger 20pos 100 mil pitch JTAG connector also exists, but connector not soldered. | |
| Other | |
|---|---|
| LCD with 8 14-segment characters. | |
| 32 Kbit I2C E2PROM. | |
| LM75 I2C temperature sensor. | |
| Trimming potentiometer on analog input. | |
| 4 capacitive sensors. | |
| Onboard reset generation and reset push-button. | |
| Push-button for enabling Bootloader mode of the LPC11D14. | |
| Push-button for enabling start logic of the LPC11D14. | |
| Push-button for wakeup logic of the LPC11D14. | |
| Possibility to measure current consumption for LPC11D14 core, I/O and LCD controller parts individually. | |
| LED on pin PIO0_7. | |
| Crystal: 12.000 MHz external crystal. The LPC11D14 runs at frequencies up to 50 MHz. | |
| Dimensions: 110 x 100 mm (W x H) | |
| Flyers and specifications | |
|---|---|
| LPC11D14 QuickStart Board schematics | |
| Documentation and guides | |
|---|---|
| LPC11D14 QuickStart Board Users Guide | |
| Software resources | |
|---|---|
| lpc11d14_qsb_111025.zip | |