LOADING
- Software frameworks: mbed and LPCPpen
- Lots of sample code
- Arm Embedded Systems Education Kit
This Experiment Base Board adds several expansion connectors to the LPC4088 QuickStart Board and makes it especially easy to connect displays to the board.
What is included?
- LPC4088 Experiment Base Board
- 61 pos 0.3 mm pitch FPC cable (for connecting to the LCD expansion connector on the LPC4088 QuickStart Board)
- LPC4088 QuickStart Board
University Platform
The ARM Embedded Systems Education Kit (LPC4088 Experiment Base Board and LPC4088 QuickStart Board) contains everything an educator needs to set up a complete embedded system design and programming curriculum. The hardware cost is reduced to a minimum since four courses use the same hardware.
Display options
- 4.3 inch TFT LCD with resistive touch – via LCD Expansion connector
- 5.0 inch TFT LCD with resistive touch – via LCD Expansion connector
- 2.7 inch E-paper Display Module – via Serial Expansion Connector
- 1.35 inch Memory LCD – via Serial Expansion Connector
- 1.8″ TFT LCD, 128×160 pixels from www.DisplayModule.com
| Interfaces / Connectors | |
|---|---|
| 2x22 headers for LPC4088 QuickStart Board | |
| 2x22 pin list for prototyping | |
| Arduino compatible expansion connectors (for Arduino shields) | |
| Serial Expansion Connector, 14-pos connector with UART/I2C/SPI/GPIO pins | |
| LCD expansion connecor with control signals for touch screen interface | |
| microSD (uSD) interface & connector (both MCI and SPI interface versions) | |
| Audio | |
|---|---|
| WM8731 Audio codec from Cirrus | |
| Microphone input (mono) | |
| Line in (stereo) | |
| Line out (stereo) | |
| Headphone out (stereo) | |
| Connectors | |
|---|---|
| UART interfaces for UART0/UART3 via FTDI cables (not included) | |
| Shift register on SPI bus controlling 8 LEDs | |
| Above shift register also creating a Character LCD interface | |
| RGB-LED | |
| 5-key Joystick | |
| LM75 I2C temperature sensor | |
| MMA7455 3-axis accelerometer on I2C bus | |
| Trimming potentiometer on analog input | |
| Connector (CR1216 coin cell) for VBAT (battery not included) | |
| Pads for connector to 1.77" TFT LCD 128x160 pixels (connector and LCD not included) | |
| LCD Interface | |
|---|---|
| FFC/FPC interface connector for 4.3" and 5" LCDs (displays sold separately) | |
| 16-bit color depth supported | |
| Touch screen interface controller (AR1021 from Microchip) | |
| Backlight voltage generator | |
| Powering | |
|---|---|
| +5V DC power supply input connector (2.1mm jack) | |
| Dimensions | |
|---|---|
| 138 x 114 mm | |
| Product Classification | |
|---|---|
| Evaluation | |
| Flyers and specifications | |
|---|---|
| Experiment Baseboard User's Guide | |
| Experiment Baseboard Schematics | |
