iMX6 DualLite COM Board
[High Resolution Photos]
iMX6 DualLite COM Board

Embedded Artists' iMX6 DualLite COM Board is equipped with NXP's Cortex-A9 based i.MX6 DualLite processor suitable for a wide range of industrial applications that requires advanced communication, real-time control and high quality graphic displays.

The i.MX 6DualLite is a dual core, high performance and energy efficient processor operting at speeds up to 1 GHz. The processor is ideal for running an OS like Linux.

Use the iMX6 DualLite Developer's Kit to get up-and-running quickly with the board.

Volume Pricing

Please contact Embedded Artists for volume pricing and customization of the standard board.

 

Do you have questions?

If you have any questions or want to discuss your project, don't hesitate to contact us for an open discussion.

   

 

Specification

Processor NXP i.MX 6DualLite with dual 1 GHz/800 MHz ARM Cortex-A9 cores
Memory 1 GByte DDR3L 800 MT/s, 64-bit databus
4 GByte eMMC NAND Flash for OS and bootloader
Graphics output

Up to two display interfaces can be active simultaneous;
• Dual LVDS: 18/24 bit, up to 85 Mpixels/sec, for example WXGA (1366 x 768 px) at 60 Hz
• Parallel RGB: 24-bit up to WXGA (1366 x 768 px) at 60 Hz
• MIPI-DSI: 2 lanes
• HDMI 1.4 port: up to 1920 x 1080 px

Graphics Engines: GPU 3D/2D (GC880/GC320) supporting OpenGL ES 1.1/2.0, OpenVG 1.1 APIs
HW video decode: 1080p30h + D1
HW video encode: 1080p30h H.264 BP / Dual 720p encode 

Graphics input CMOS sensor interface (camera), parallel interface,
and serial interface: MIPI-CSI2, 2 lanes
Ethernet 10/100/1000 Mbps Gigabit Ethernet interface with on-board Ethernet-PHY
I/O i.MX 6DualLite peripherals (see i.MX 6DualLite datasheet for details about peripherals):
• PCIe; 1x lane, v2.0
• USB; 1x USB 2.0 Host, 1x USB 2.0 OTG
• Audio; 3x SSI, ESAI
• SPDIF; 1 channel
• SDIO; 3x MMC/SD/SDIO
• Serial Port; 5x UART
• SPI; 4x eCSPI
• CAN; 2x CAN bus 2.0B
• I2C; 3x channels
• PWM; 4x channels
See iMX6 DualLite COM Board Datasheet for details about available pins/peripherals.
Mechanical 82 x 50 mm (W x D), SMARC form factor but different pinning for better carrier board routing
Power +3.3V power supply voltage
Power consumption: TBD
Connectors 314 pos MXM3 edge connector, 0.5mm pitch
10 pos, 0.5mm pitch FPC for JTAG
Environment Operating Temperature: 0 - 70 degrees Celsius (standard) or -40 to +85 degrees Celsius (on request)
Operating Humidity: 5 - 90% relative humidity, non-condensing
Other • i.MX 6DualLite on-chip RTC
• On-board watchdog functionality
• Integrated power management with PMIC (PF0100) supporting DVFS techniques for low power modes
Product Classification
and Status
Integration board; In Development/Sampling

Related Products