iMX6 Quad COM Board
[High Resolution Photos]
iMX6 Quad COM Board

Embedded Artists' iMX6 Quad COM Board is equipped with NXP's quad-core Cortex-A9 based i.MX6Quad processor suitable for a wide range of industrical applications that requires advanced communication, real-time control and high quality graphic displays.

The i.MX 6Quad is quad core, high performance and energy efficient processor operating at speeds up to 1 GHz. The processor is ideal for running an OS like Linux.

Use the iMX6 Quad Developer's Kit to get up-and-running quickly with the board.

 

Do you have questions?

If you have any questions or want to discuss your project, don't hesitate to contact us for an open discussion.

   

 

Specification

Processor NXP i.MX 6Quad with quad 1 GHz/800 MHz ARM Cortex-A9 cores
Memory 2 GByte DDR3L 1066 MT/s, 64-bit databus
4 GByte eMMC NAND Flash for OS and bootloader
Graphics outputs Up to four display interfaces can be used simultaneous;
• Dual LVDS: 18/24 bit, up to 85 Mpixels/sec, for example WXGA (1366 x 768 px) at 60 Hz
• Parallel RGB: 24-bit up to WXGA (1366 x 768 px) at 60 Hz
• MIPI-DSI: 2 lanes
• HDMI 1.4 port: up to 1920 x 1080 px
Graphics inputs CMOS sensor interface (camera), parallel interface,
and serial interface: MIPI-CSI2, 4 lanes
Graphics engines • GPU 3D/2D (GC2000/GC355/GC320) supporting OpenGL ES 3.0, OpenVG 1.1 APIs
• HW video decoder: 1080p60h H.264 HP
• HW video encoder: 1080p30h H.264 BP / Dual 720p
Ethernet 10/100/1000 Mbps Gigabit Ethernet interface with on-board Ethernet-PHY
I/O i.MX 6Quad peripherals (see i.MX 6Quad datasheet for details about peripherals):
• PCIe; 1x lane, v2.0
• SATA; 1x SATA II
• USB; 1x USB 2.0, 1x USB 2.0 OTG
• Audio; up to 4 I2S/AC97 ports
• SPDIF; 1 channel
• SDIO; 3x MMC/SD/SDIO
• Serial Port; 5x UART
• SPI; 5x eCSPI
• CAN; 2x CAN bus 2.0B
• I2C; 3x channels
• PWM; 4x channels
See iMX6 Quad COM Board Datasheet for details about available pins/peripherals.
Mechanical 82 x 50 mm (W x D), SMARC form factor but different pinning for better carrier board routing
Power +3.3V power supply voltage
Power consumption: TBD
Connectors 314 pos MXM3 edge connector, 0.5mm pitch
10 pos 0.5mm pitch FPC for JTAG
Environment Operating Temperature: 0 - 70 degrees Celsius (standard) or -40 to +85 degrees Celsius (on request)
Operating Humidity: 5 - 90% relative humidity, non-condensing
Other • i.MX 6Quad on-chip RTC
• On-board watchdog functionality
• Integrated power management with PMIC (PF0100) supporting DVFS techniques for low power modes
Product Classification
and Status
Integration board; In Development/Sampling

Related Products