iMX7 Dual COM Board
[High Resolution Photos]
iMX7 Dual COM Board

Embedded Artists' iMX7 Dual COM Board is equipped with NXP's dual-core Cortex-A7/Cortex-M4 based i.MX 7Dual processor, lots of on-board memory and an efficient Power Management IC.

The board is suitable for a wide range of applications that requires advanced communication, real-time control and graphic displays.

The board has low-power focus:

  • the iMX7 is very power efficient to begin with,
  • has on-board DDR3L memory, and
  • PMIC has high conversion efficiency over a wide range of loads.

The heterogeneous system architecture enables the system to run an OS like Linux on the dual-core Cortex-A7 and a Real-Time OS (RTOS) on the Cortex-M4:

  • clear separation of real-time tasks from general server and graphical releated processing
  • can save power if the Cortex-M4 core performs preprocessing before the more power hungry Cortex-A7 cores are activated

Use the iMX7 Dual COM Developer's Kit to get up-and-running quickly with the board.

Volume Pricing

Please contact Embedded Artists for volume pricing and customization of the standard board.


Do you have questions?

If you have any questions or want to discuss your project, don't hesitate to contact us for an open discussion.


TouchGFX Graphical Demo on iMX6UL / iMX7D

Benefits of having a heterogeneous Cortex-M4 core
(video presents the benefits on the i.MX 6SoloX and the benefits are exactly the same on the i.MX 7Dual)



Processor NXP ARM Cortex-A7/Cortex-M4 i.MX 7Dual 1 GHz / 200 MHz for Cortex-M4 core
Memory 1 GByte DDR3L 1066 MT/s, 32-bit databus
4 GByte eMMC NAND Flash for OS and bootloader
32 MByte QSPI NOR Flash for Cortex-M4 code
Graphics output Parallel RGB: 24-bit up to 1920 x 1080 pixels at 60 Hz
MIPI-DSI: 2 lanes
Optional LVDS interface, MIPI-DSI to LVDS bridge connected to MIPI-DSI interface
Graphics input CMOS sensor interface (camera), MIPI-CSI 2 lanes
Ethernet One 10/100/1000 Mbps Gigabit Ethernet interfaces on processor.
Second Gigabit Ethernet interface is possible but requires an off-board Ethernet PHY
I/O i.MX 7Dual peripherals (see i.MX 7Dual datasheet for details about peripherals):
• PCIe; 1x lane, v2.1
• USB; 2x USB 2.0 OTG
• Audio; 3x I2S
• SDIO; 2x SD3.0/MMC5.0
• Serial Port; 7x UART
• SPI; 4x eCSPI
• CAN; 2x CAN bus 2.0B
• I2C; 4x channels
• ADC; 2x 4ch 12-bit inputs
See iMX7 Dual COM Board Datasheet for details about available pins/peripherals.
Mechanical 82 x 50 mm (W x H), SMARC form factor but different pinning for better carrier board routing
Power +3.3V power supply voltage
Power consumption: TBD
Connectors 314 pos MXM3 edge connector, 0.5mm pitch
10 pos, 0.5mm pitch FPC for JTAG
Environment Operating Temperature: 0 - 70 degrees Celsius (standard) or -20 to +85 degrees Celsius (industrial)
Operating Humidity: 5 - 90% relative humidity, non-condensing
Other i.MX 7Dual on-chip RTC
On-board watchdog functionality
Integrated power management with PMIC (PF3000) supporting DVFS techniques for low power modes
Product Classification
and Status
Integration board; In Development/Sampling

Related Products